Online Materials science courses

Fundamentals of Natural Science - Level 2

Exam and Certificate Included | Free trial on over 150 courses for 2 days | Free Career Support Service

£12 inc VAT (was £199)

Save 94% - Ends today

Fundamentals of Natural Science Do you have a flair for science? Studying Natural Science can open a lot of doors as it shows intelligence, problem solving ability, the ability to record and collect information and analytical skills. Whether you’re interested in the field of science, hope to g...

Fundamentals of Materials Characterization and Selection

Classroom based course with study materials, lecturer support and CPD Hours included

£4,200 inc VAT

Material selection is one the most important aspects that engineers and designers have to keep in mind during the design and production of any work. A good material selection is fundamental to lower the production costs, to improve product performances (e.g. durability) and to raise customers’ sati...

Unsaturated Polyester Resin

Classroom based course with study materials, lecturer support and CPD Hours included

£4,200 inc VAT

Unsaturated polyester resins are some of the most important polymeric products of our times. Manufacturing technology is constantly evolving, and its understanding is the key to high efficiency manufacturing plants, high quality intermediate and end products as well as a constantly increasing range...

Introduction to Manufacturing processes

Classroom based course with study materials, lecturer support and CPD Hours included

£4,200 inc VAT

Manufacturing processes offer us all commercial products used daily in our lives. Traditional manufacturing processes have sharply changed during the last twenty years and are expected to continue changing due to a number of factors that include subtractive manufacturing, environmental regulations,...

Design, Operation and Control of Crystallization Equipment

Classroom based course with study materials, lecturer support and CPD Hours included

£4,200 inc VAT

Learning Objectives: Crystallization is a separation process used in many industrial applications, such as pharmaceuticals and food industry (sugar and salt). Modelling this process involves the resolution of many equations’ systems related to mass, energy and population balance. Consequently, cry...

Chemical Engineering for Non Chemical Engineers

Classroom based course with study materials, lecturer support and CPD Hours included

£4,200 inc VAT

This programme identifies the areas of chemical engineering that are most commonly encountered by the non-specialist with examples that will be drawn from a range of process industries including oil and gas processing, petrochemicals, chemical manufacturing. Objectives In this programme you will: L...

High Performance Liquid Chromatography

Classroom based course with study materials, lecturer support and CPD Hours included

£4,200 inc VAT

Analytical methods play a vital role in any laboratory and any industrial process. They are used as a means of identifying concentrations and compositions of different phases and mixes under varying conditions and accuracy requirements. Besides the traditional analytical methods, other versions of ...

Ethylene Polymerization Reactors

Classroom based course with study materials, lecturer support and CPD Hours included

£4,200 inc VAT

This course describes the PE polymerization reaction kinetics and reactor design in detail. The main focus is found on the actual polymerization reactors and their design and operation. Each different polymerization scheme is investigated, and the respective reactors are presented in detail. Reacti...

Ethylene Polymerization Technology

Classroom based course with study materials, lecturer support and CPD Hours included

£4,200 inc VAT

This course describes the polymerization reaction kinetics and types in detail. It covers all polymerization mechanisms and is continuously updated to technological advances. It covers different approaches, catalysts, conditions, reactors, control schemes so that the attendant is presented with all...

Heat Transfer Fundamentals

Classroom based course with study materials, lecturer support and CPD Hours included

£4,200 inc VAT

Heat transfer is the major topic in each industrial application. Each chemical, mechanical and industrial topic is designed and operated according to the heat transfer phenomena involved. The properties of materials, the financial outcome of processes, the safety of operations all rely on optimized...

Advanced Polystyrene Chemistry

Classroom based course with study materials, lecturer support and CPD Hours included

£4,200 inc VAT

Polystyrene is one of the top selling polymers worldwide. Its extended use comes with known issues such as its non biodegradation. However, ease of manufacture, number of applications and abundance of raw materials have led to polystyrene becoming one of the most important chemicals of our time. On...

Applied Chemical Engineering (1 WEEK)

Classroom based course with study materials, lecturer support and CPD Hours included

£4,200 inc VAT

This seminar presents the scientific principles and applications in the heavy chemical industry such as refineries, plastics production, and petrochemicals by examining all procedures involved. Sub operations are described and analyzed with means of both underlying science and applied methodologies...

Applied Chemical Engineering (2 WEEKS)

Classroom based course with study materials, lecturer support and CPD Hours included

£4,200 inc VAT

This seminar presents the scientific principles and applications in the heavy chemical industry such as refineries, plastics production, and petrochemicals by examining all procedures involved. Sub operations are described and analyzed with means of both underlying science and applied methodologies...

Strength of Material

£99 inc VAT

Strength of Material 7+ Hours OF HD VIDEOS Verifiable CERTIFICATION Practical SKILLS DEVELOPMENT Accelerate YOUR CAREER Lifetime Access 24*7 Unlimited Access Access through any device Technical support Mobile App Access In this elementary study on the strength of materials, the response ...

Preliminary Design through Process Simulation

Classroom based course with study materials, lecturer support and CPD Hours included

£4,200 inc VAT

Process simulation is a versatile tool used by process engineers to investigate about the feasibility of a process and to carry out preliminary design of chemical plants. This course will give you the knowledge necessary to use process simulation software with confidence and efficacy in order to sa...

Introduction to Computational Fluid Dynamics

Classroom based course with study materials, lecturer support and CPD Hours included

£4,200 inc VAT

Computational Fluid Dynamics (CFD) is a powerful tool used by experts to predict the behaviour of any type of fluid (i.e.: liquids, gases, particulate solids, multiphase flow, etc.). Due to the rapid development of the computer capabilities, nowadays CFD is accessible to everyone that has the neces...

Theory and Practice of Electrochemical Processes

Classroom based course with study materials, lecturer support and CPD Hours included

£4,200 inc VAT

Electrochemistry is a crucial discipline because of its countless applications. Furthermore, nowadays the interest of researchers for electrochemistry is rising in an exponential way because of its implications on new promising fields (e.g.: nanotechnology, membrane technology and hydrogen producti...

MATLAB Programming for Chemical Engineering

Classroom based course with study materials, lecturer support and CPD Hours included

£4,200 inc VAT

Matlab is a programming environment used extensively by chemical engineers because of its simplicity and versatility. In particular Matlab is ideal to carry out mathematical modelling related to process design, control and optimization. This course will give you an overview of the most important ca...

Functional Description and Settings of the Turbine Governor

Classroom based course with study materials, lecturer support and CPD Hours included

£4,200 inc VAT

Learning Objectives: To develop a solid background in Turbine Governor Functional Description and Settings. To enable participants to safely operate turbine units. To enable participants to properly analyze operating problems and take the necessary corrective action. To emphasise the operator’s res...

Measurement and Sensor Technology

Classroom based course with study materials, lecturer support and CPD Hours included

£4,200 inc VAT

Measurement of different properties is the key in any chemical, physical, thermal, electronic, optical or mechanical process. Accurate and quick measurement allow for identification of errors, explaining of phenomena and prediction of efficiency of different systems. Measurement has been of great i...

Total Organic Carbon Analyzer (TOC)

Classroom based course with study materials, lecturer support and CPD Hours included

£4,200 inc VAT

A total carbon analyzer (TOCA) is an analytical instrument used for evaluating the total organic carbon content in various types of solutions such as – drinking water, ground water, sea water, surface water, water for injection purposes, high purity water, brine samples and even in effluent waste w...

Report Writing for Engineers

Classroom based course with study materials, lecturer support and CPD Hours included

£4,200 inc VAT

Conducting research, designing and operating processes, troubleshooting equipment is only a part of the engineer’s job. The following part to convey all information to other parties. This information is delivered through technical, scientific or academic reports that every engineer should be able t...

Advanced Turbo Expander Compressor Technology in Ethylene Plants

Classroom based course with study materials, lecturer support and CPD Hours included

£4,200 inc VAT

This programme identifies the key areas of chemical engineering that are most commonly encountered by the non-specialist with examples that will be drawn from a range of process industries including oil and gas processing, petrochemicals, chemical manufacturing. Objectives: In this programme you wi...

Furnaces: Safe Operation and Optimization

Classroom based course with study materials, lecturer support and CPD Hours included

£4,200 inc VAT

Objectives: To describe industrial combustion phenomena and calculate the air/fuel ratio for optimum combustion. To identify bad-quality combustion from flue gas analysis and flame study, and implement corrective steps. To list and apply the main steps of a furnace start-up procedure. To recognize ...

Principles, Design and Operation of Distillation Techniques

Classroom based course with study materials, lecturer support and CPD Hours included

£4,200 inc VAT

Distillation is a technique widely used in refineries, petrochemical plants, chemical plants, chemistry laboratories and in many other fields. To deepen professional knowledge about distillation techniques is extremely valuable, because a good distillation design, maintenance and operation positive...