Cisco CCNA Online Course

The Cisco Certified Network Associate (CCNA) is an entry-level IT certification issued by Cisco. If you’re looking for a networking role in IT, such as a network specialist, administrator, or engineer, getting a CCNA certification by passing the 200-301 exam can be a great way to prepare. While there are no prerequisites for the exam, training is recommended.

Cisco Certified Network Associate (200-301 CCNA) Online Training

In this entry-level Cisco CCNA training, we prepare learners to take the 200-301 CCNA exam — the one exam required to earn the Cisco Certified Network Associate certification.

Cisco technologies are everywhere, which means properly trained professionals with the CCNA certification will continue to be sought after. After taking this CCNA course, you'll be ready to take the 200-301 CCNA, and validate the entry-level skills expected of a network administrator.

Entry Requirements

There are no prerequisites to study the Cisco CCNA course.

Course Assessment Process

To earn your official Cisco CCNA certification from Cisco, you will need to study the Cisco CCNA training course and pass the Cisco 200-301 exam.

Exam Code:

• Cisco 200-301

To prepare you for your exam, we provide interactive quizzes after each module and a mock exam at the end of your course to ensure you’re fully prepared for the real thing. Once you’ve passed with at least 85%, you’ll be ready to book your exam as a private candidate. To make life easier, we can help you find an appropriate exam centre and give you all the information you need to secure your place.

Please note: the exam fees aren’t included in the course price and must be purchased separately.

Course Content

The Cisco CCNA course is organized into the following modules:

Module 1: Exploring the Functions of Networking

1. Instructor Intro
2. Course Intro
3. Exploring the Functions of Networking pt.1
4. Exploring the Functions of Networking pt.2

Module 2: Introduction the Host-to-Host Communications Model

1. Introducing the Host-to-Host Communications Model pt.1
2. Introducing the Host-to-Host Communications Model pt.2

Module 3: Introducing LANs

1. Introducing LANs
2. Get Started with CLI Demo
3. Adding Description to Interfaces Demo
4. Configure Gateway on a Switch Demo
5. Visualize Interfaces and Statistics Demo
6. Show Version Command Demo
7. CDP Demo

Module 4: Exploring the TCP/IP Link Layer

1. Exploring the TCP/IP Link Layer pt.1
2. Exploring the TCP/IP Link Layer pt.2

Module 5: Subnetting

1. Subnetting pt.1
2. Subnetting pt.2
3. Subnetting pt.3
4. Subnetting pt.4
5. Subnetting pt.5
6. Subnetting pt.6

Module 6: Explaining the TCP/IP Transport Layer and Application Layer

1. Explaining the TCP/IP Transport Layer and Application Layer pt.1
2. Explaining the TCP/IP Transport Layer and Application Layer pt.2
3. Explaining the TCP/IP Transport Layer and Applications Layer pt.3

Module 7: Exploring the Functions of Routing

1. Exploring the Functions of Routing pt.1
2. Exploring the Functions of Routing pt.2
3. Exploring the Functions of Routing pt.3
4. Configuring RIP Demo
5. EIGRP Demo pt.1
6. EIGRP Demo pt.2

Module 8: Exploring the Packet Delivery Process

1. Exploring the Packet Delivery Process

Module 9: Troubleshooting a Simple Network

1. Troubleshooting a Simple Network

Module 10: Introducing Basic IPv6

1. Introducing Basic IPv6 pt.1
2. Introducing Basic IPv6 pt.2
3. Introducing Basic IPv6 pt.3
4. Introducing Basic IPv6 pt.4
5. Introducing Basic IPv6 pt.5
6. Introducing Basic IPv6 pt.6
7. Introducing Basic IPv6 pt.7
8. Introducing Basic IPv6 pt.8
9. IPv6 Basic Configuration and SLAAC Demo pt.1
10. IPv6 Basic Configuration and SLAAC Demo pt.2
11. IPv6 Routing Demo pt.1
12. IPv6 Routing Demo pt.2
13. IPv6 Static Routes Demo

Module 11: Configuring Static Routing

1. Configuring Static Routing
2. Static Routes Demo

Module 12: Implementing VLANs And Trunks

1. Implementing VLANs and Trunks pt.1
2. Implementing VLANs and Trunks pt.2
3. Implementing VLANs and Trunks pt.3
4. Implementing VLANs and Trunks pt.4
5. Spanning-tree Protocol Demo pt.1
6. Spanning-tree Protocol Demo pt.2
7. Spanning-tree Protocol Demo pt.3

Module 13: Routing Between VLANs

1. Routing Between VLANs
2. Inter VLAN Routing Demo
3. Module 14: Introducing OSPF
4. Introducing OSPF pt.1
5. Introducing OSPF pt.2
6. Introducing OSPF pt.3
7. Introducing OSPF pt.4
8. OSPF Single Area Demo pt.1
9. OSPF Single Area Demo pt.2
10. OSPF Multiple Area Demo pt.1
11. OSPF Multiple Area Demo pt.2

Module 15: Building Redundant Switched Topologies

1. Building Redundant Switch Topologies pt.1
2. Building Redundant Switch Topologies pt.2
3. Module 16: Improving Redundant Switched Topologies with EtherChannel
4. Improving Redundant Switched Topologies with EtherChannel pt.1
5. Improving Redundant Switched Topologies with EtherChannel pt.2
6. Configuring Ether Channel Demo

Module 17: Exploring Layer 3 Redundancy

1. Exploring Layer 3 Redundancy

Module 18: Introducing WAN Technologies

1. Introducing WAN Technologies pt.1
2. Introducing WAN Technologies pt.2
3. Introducing WAN Technologies pt.3
4. Introducing WAN Technologies pt.4
5. Introducing WAN Technologies pt.5
6. Introducing WAN Technologies pt.6

Module 19: Explaining Basics of ACL

1. Explaining Basics of ACL pt.1
2. Explaining Basics of ACL pt.2
3. Explaining Basics of ACL pt.3

Module 20: Enabling Internet Connectivity

1. Enabling Internet Connectivity
2. DHCP Demo
3. Static NAT Demo
4. PAT Using Specific IP Demo
5. PAT Using UP of Interface Demo

Module 21: Introducing Qos

1. Introducing QoS pt.1
2. Introducing QoS pt.2
3. Introducing QoS pt.3
4. Introducing QoS pt.4
5. Introducing QoS pt.5

Module 22: Introducing Architectures and Virtualization

1. Introducing Architectures and Virtualization pt.1
2. Introducing Architectures and Virtualization pt.2
3. Introducing Architectures and Virtualization pt.3
4. Introducing Architectures and Virtualization pt.4

Module 23: Introducing System Monitoring

1. Introducing System Monitoring pt.1
2. Introducing System Monitoring pt.2
3. Introducing System Monitoring pt.3

Module 24: Managing Cisco Devices

1. Managing Cisco Devices pt.1
2. Managing Cisco Devices pt.2
3. NTP Demo
4. Syslog Demo

Module 25: Examining the Security Threat Landscape

1. Examining the Security Thread Landscape pt.1
2. Examining the Security Thread Landscape pt.2

Module 26: Implementing Threat Defense Technologies

1. Implementing Thread Defense Technologies pt.1
2. Implementing Thread Defense Technologies pt.2
3. Implementing Thread Defense Technologies pt.3
4. Implementing Thread Defense Technologies pt.4
5. Implementing Thread Defense Technologies pt.5
6. Authentication Protocols Demo pt.1
7. Authentication Protocols Demo pt.2
8. Device Hardening Demo pt.1
9. Device Hardening Demo pt.2
10. Device Hardening Demo pt.3
11. Port Security Demo

Module 27: Exam Preparation

1. Exam Prep Tips

Benefits of studying with Study247:

• Ability to study at your own pace 24/7
• You can pause and rewind the material at any time
• Studying is broken down into easily manageable sections
• Access to study material for 12 months
• Our students are eligible to apply for a XO Student Card.

This course is designed for anyone seeking CCNA certification. The course also provides foundational knowledge for all support technicians involved in the basic installation, operation, and verification of Cisco networks.

By choosing online learning instead of a classroom based course, it eliminates the need for time away from work, saving you valuable time and money. It is ideal for those with tight schedules as our online courses give you 12 months unlimited access to all the course materials, so you can study at a pace that suits you. Allowing you to easily resume your studies whenever you have the time. All you need is internet connection to study, so you can study from the comfort of your home or any environment that suits you.

Our training works on all devices including Mobile phones, IPad’s, Android tablets, Macs and PC’s.

For the best viewing experience on our state-of-the-art eLearning platform we recommend an internet connection of 10Mbps or better. Please also use Google Chrome or Mozilla Firefox as your browser with Adobe Flash Player.

Currently there are no Q&As for this course. Be the first to ask a question.