Skip to content

Mechanical Skills - CPD Accredited

Summer into Savings | 11-in-1 Bundle| 140 CPD Points| Gifts: Hardcopy + PDF Certificate + SID - Worth £180


Apex Learning

Summary

Price
Save 10%
£49 inc VAT (was £55)
Offer ends 06 December 2024
Study method
Online
Duration
440 hours · Self-paced
Access to content
Lifetime access
Qualification
No formal qualification
CPD
140 CPD hours / points
Certificates
  • Certificate of completion - Free
  • Certificate of completion - Free
Additional info
  • Exam(s) / assessment(s) is included in price
  • Tutor is available to students

8 students purchased this course

Add to basket or enquire

Overview

Boost Your Career with Apex Learning and Get Noticed By Recruiters in this Hiring Season! Get Hard Copy + PDF Certificates + Transcript + Student ID Card worth £160 as a Gift - Enrol Now

Give a compliment to your career and take it to the next level. This Mechanical Skills will provide you with the essential knowledge and skills required to shine in your professional career. Whether you want to develop skills for your next job or want to elevate skills for your next promotion, this Mechanical Skills will help you keep ahead of the pack.

The Mechanical Skills incorporates basic to advanced level skills to shed some light on your way and boost your career. Hence, you can reinforce your professional skills and knowledge, reaching out to the level of expertise required for your position. Further, this Mechanical Skills will add extra value to your resume to stand out to potential employers.

Throughout the programme, it stresses how to improve your competency as a person in your profession while at the same time it outlines essential career insights in this job sector. Consequently, you’ll strengthen your knowledge and skills; on the other hand, see a clearer picture of your career growth in future. By the end of the Mechanical Skills, you can equip yourself with the essentials to keep you afloat into the competition.

Along with this Mechanical Skills course, you will get 10 other premium courses. Also, you will get an original Hardcopy and PDF certificate for the title course and a student ID card absolutely free.

This Mechanical Skills Bundle Consists of the following Premium courses:

  • Course 01: Car Mechanic and Repair Training
  • Course 02: Motorbike Repairing and Maintenance Diploma
  • Course 03: Engine Lubricant System Training - Level 4
  • Course 04: Electrical Engineering DC Circuit Analysis
  • Course 05: Level 3 Heating, Ventilation & Air Conditioning (HVAC) Technician
  • Course 06: PAT Level 4
  • Course 07: PUWER
  • Course 08: Handyperson
  • Course 09: Manual Handling Level 2
  • Course 10: Workplace Safety Course
  • Course 11: First Aid Training

As one of the top course providers in the UK, we’re committed to providing you with the best educational experience possible. Our industry experts have designed the Mechanical Skills to empower you to learn all at once with accuracy. You can take the course at your own pace — anytime, from anywhere.

So, enrol now to advance your career!

Benefits you’ll get choosing Apex Learning for this Mechanical Skills:

  • One payment, but lifetime access to 11 CPD courses
  • Certificate, student ID for the title course included in a one-time fee
  • Full tutor support available from Monday to Friday
  • Free up your time — don’t waste time and money travelling for classes
  • Accessible, informative modules taught by expert instructors
  • Learn at your ease — anytime, from anywhere
  • Study the course from your computer, tablet or mobile device
  • CPD accredited course — improve the chance of gaining professional skills

How will I get my Certificate?

After successfully completing the course you will be able to order your CPD Accredited Certificates (PDF + Hard Copy) as proof of your achievement.

  • PDF Certificate: Free (Previously it was £6*11 = £66)
  • Hard Copy Certificate: Free (For The Title Course: Previously it was £10)

Certificates

Certificate of completion

Digital certificate - Included

Certificate of completion

Hard copy certificate - Included

You will get the Hard Copy certificate for the title course (Car Mechanic and Repair Training) absolutely Free! Other Hard Copy certificates are available for £10 each.

Please Note: The delivery charge inside the UK is £3.99, and the international students must pay a £9.99 shipping cost.

CPD

140 CPD hours / points
Accredited by CPD Quality Standards

Course media

Description

Curriculum of Mechanical Skills Bundle

Course 01: Car Mechanic and Repair Training

  • Module 01: Safety Rules & Introduction to Tools
  • Module 02: General Maintenance for Car Mechanics
  • Module 03: Dashboard Indicator Lights
  • Module 04: Tyres
  • Module 05: Internal Combustion Engines & Engine Oil
  • Module 06: The Cooling System
  • Module 07: The Fuel System
  • Module 08: The Electrical System
  • Module 09: The Drive Train
  • Module 10: Brakes
  • Module 11: Buying a Car

Course 02: Motorbike Repairing and Maintenance Diploma

  • Introduction to Motorbike Maintenance
  • Basics of Engine
  • Engine Cooling and Lubrication
  • Ignition
  • Suspension
  • Intake, Fuel, Clutch and Exhaust Systems
  • Electrical Maintenance
  • Wheels, Tires and Brakes Maintenance
  • Transmission, Frame and Steering
  • Cleaning, Setting Up and Storage
  • Troubleshooting

Course 03: Engine Lubricant System Training - Level 4

  • Introduction
  • Functions & Components of Lubrication System
  • Basic Working of the Lubrication System
  • Properties, Additives & Designations of Lube Oils
  • Lab Analysis & Diagnostics of the Lubrication Oil

Course 04: Electrical Engineering DC Circuit Analysis

  • Module 01: Course Introduction
  • Module 02: Introduction to Electrical Engineering
  • Module 03: Circuit Analysis Introduction
  • Module 04: Circuit Analysis Techniques
  • Module 05: Ohm’s Law
  • Module 06: Kirchhoff Current Law
  • Module 07: Kirchhoff Voltage Law
  • Module 08: Nodal Analysis
  • Module 09: Mesh Analysis
  • Module 10: Importance of Circuit Analysis

Course 05: Level 3 Heating, Ventilation & Air Conditioning (HVAC) Technician

  • Module 01: Introduction to Heating, Ventilation & Air Conditioning (HVAC)
  • Module 02: Heating Fundamentals and Psychrometrics
  • Module 03: HVAC Systems
  • Module 04: Heating and Ventilation
  • Module 05: Air Conditioning Systems for HVAC Technicians
  • Module 06: Compressors, Water Chillers, and Fans
  • Module 07: Piping for HVAC Technician
  • Module 08: Duct System in HVAC
  • Module 09: Refrigeration and Refrigerants
  • Module 10: Special Applications
  • Module 11: HVAC System Selection
  • Module 12: Safety in the HVAC Industry

Course 06: PAT Level 4

  • Module 01: Introduction to PAT
  • Module 02: Relevant Statutory Provisions for PAT
  • Module 03: Risk Assessment
  • Module 04: Reducing and Controlling Risks
  • Module 05: Electrical Units and Appliance Classification
  • Module 06: Initial Visual Examination
  • Module 07: Instruments for Testing and Equipment Inspection
  • Module 08: Electrical Installation Testing
  • Module 09: Safety Precautions in Electrical Testing
  • Module 10: Reporting and Record-keeping

Course 07: PUWER

  • Module 01: Provision and Use of Work Equipment Regulations
  • Module 02: Selection and Conformity of Work Equipment
  • Module 03: Safe Functionality of Work Equipment
  • Module 04: Monitoring and Evaluation of Work Equipment
  • Module 05: Maintenance of Work Equipment

Course 08: Handyperson

  • Module 01: Introduction to Handyperson
  • Module 02: Basic Tools and Equipment
  • Module 03: Electrical Work
  • Module 04: Plumbing Skills
  • Module 05: Appliances
  • Module 06: General Carpentry
  • Module 07: Basic Maintenance Skills
  • Module 08: Walls and Floors
  • Module 09: Painting and Decorating
  • Module 10: Drilling, Tiling and Welding
  • Module 11: Construction Projects
  • Module 12: Health and Safety at Work
  • Module 13: Starting Own Business for Handyperson

Course 09: Manual Handling Level 2

  • Introduction, Legislation and Guidance
  • Manual Handling Hazards and Injuries
  • Manual Handling Risk Assessments
  • Controlling and Reducing the Risks
  • Safe Lifting Techniques

Course 10: Workplace Safety Course

  • Module 01 : Health and Safety at Work and the Laws
  • Module 02 : Managing for Health and Safety
  • Module 03 : Risk Assessment and Common Risks
  • Module 04 : Workplace Health, Safety and Welfare
  • Module 05 : Accidents and Ill Health at Work
  • Module 06 : Electrical, Fire and Gas Safety
  • Module 07 : Safety in Different Work Settings
  • Module 08 : Work Equipment Hazards and Risk Control
  • Module 09 : Other Health and Safety Hazards at Work

Course 11: First Aid Training

  • Introduction to Workplace First Aid
  • Legal Framework for Workplace First Aid
  • Incident Management at Work
  • Primary Survey
  • Secondary Survey
  • Basic First-Aid Techniques
  • Dealing with Minor Injuries at the Workplace
  • Secondary Illness Loss of Responsiveness and CPR
  • Secondary Illness Breathing Problems
  • Secondary Illnesses and Injuries
  • Dealing With Fractures and Dislocations
  • Call for an Emergency

Who is this course for?

Anyone from any background can enrol in this Mechanical Skills bundle. Persons with similar professions can also refresh or strengthen their skills by enrolling in this course. Students can take this course to gather professional knowledge besides their study or for the future.

Requirements

Our Mechanical Skills is fully compatible with PC’s, Mac’s, Laptop, Tablet and Smartphone devices. This course has been designed to be fully compatible with tablets and smartphones so you can access your course on Wi-Fi, 3G or 4G.

There is no time limit for completing this course, it can be studied in your own time at your own pace.

Career path

Having these various expertise will increase the value in your CV and open you up to multiple job sectors.

Questions and answers

Currently there are no Q&As for this course. Be the first to ask a question.

Reviews

Currently there are no reviews for this course. Be the first to leave a review.

FAQs

Interest free credit agreements provided by Zopa Bank Limited trading as DivideBuy are not regulated by the Financial Conduct Authority and do not fall under the jurisdiction of the Financial Ombudsman Service. Zopa Bank Limited trading as DivideBuy is authorised by the Prudential Regulation Authority and regulated by the Financial Conduct Authority and the Prudential Regulation Authority, and entered on the Financial Services Register (800542). Zopa Bank Limited (10627575) is incorporated in England & Wales and has its registered office at: 1st Floor, Cottons Centre, Tooley Street, London, SE1 2QG. VAT Number 281765280. DivideBuy's trading address is First Floor, Brunswick Court, Brunswick Street, Newcastle-under-Lyme, ST5 1HH. © Zopa Bank Limited 2024. All rights reserved.